Download subtitle and video from Youtube

Quicky way to download subtitle and video from Youtube: go to https://thetv.info/[youtube-id]
E.g. Change https://youtu.be/6I2BnX32qNQ to https://thetv.info/6I2BnX32qNQ

Video how to make your own stock

TheTV.info
12:03   |   9K+ views   |   07/18/2018 at 21:37

Transcription

  • hello guys this is Jones 10 395 and
  • today I'll be doing a first for my
  • channel this will be a how to make a
  • stop for really anything that need to
  • stop I will be just showing you kind of
  • step by step what to do using my own
  • design you can also make your own if you
  • are watching mr. entertainment purposes
  • only then enjoy but if you're actually
  • gonna make a stop for say a weapon or
  • something in my case it's an air cannon
  • I didn't make this specific to a real
  • weapon because the same principles
  • applies you have to know that the
  • dimensions of the weapon the upper
  • receiver you're going to be mating with
  • the lower receiver which in this case
  • will be the wood and so I'll show you up
  • my little crappy blueprint is this is
  • what my stock will look like not really
  • crappy I just don't have dimensions on
  • it I'm gonna eyeball it on here but this
  • will be a four grip to hold this is
  • where your shoulder will go to the the
  • butt and then this is where the upper
  • receiver or the air cannon will be and
  • this right here is for the ball valve so
  • I'm gonna get started I'm just gonna
  • draw my design on all the piece of where
  • right here's my design and I'll be
  • cutting out right here they're not
  • cutting out but this is paper design
  • here it is on the wood right here you
  • can see that maybe faint line my
  • battery's about to die so I'm going to
  • put you guys on the charger while I'm
  • cutting this out with my jigsaw so I'll
  • be back with you in a second alright
  • here we are I have just cut out the
  • outer section of the ear cannon or I
  • mean the stock for my air cannon I must
  • say it looks very very nice and feels
  • very smooth hope you'll mine the Raven
  • background for this cut right here which
  • is internal I don't know I'm gonna call
  • it an internal cut right now you're
  • gonna want to drill a hole in here
  • that sorry for the voice Craig drill a
  • hole in here that we'll be able to fit
  • your jigsaw blade which in my case I
  • believe is I'm gonna say 3/8 of an inch
  • I wanna call it tall the cutting edge is
  • 3 7 inch I guess I don't have a
  • technical term but they're gonna drill a
  • hole in here and then take your jigsaw
  • out and just put around the outer edge
  • be very careful go very slow which is
  • what you should do for the entire bill
  • take your time
  • and that's basically everything I'm
  • gonna tell you right now I'll show you
  • what I get done after I cut it so here
  • we go all right here is my jigsaw blade
  • right there doesn't want to focus on it
  • but there's my blade and this guy right
  • here will be my drill drill bit don't
  • know the size I just kind of thrown
  • around in the drill kit so I'll get to
  • drilling right here
  • all right if you saw me kind of like
  • pulling back at the end it's because I
  • don't want to splinter it which I did
  • anyways splintering the wood right here
  • didn't want to do that but since it's
  • close into the center enough it
  • shouldn't make a difference in my what
  • will be my fore grip when I'm done
  • putting this out so I guess I'll try to
  • keep the camera rolling whenever it
  • decides to stop recording is well for
  • the next part of the build for the video
  • so here's my jigsaw alright here we go
  • go to move you guys
  • alright here's the finished product not
  • finished completely but basically
  • finished all I'm going to do now is
  • first razor blade down everything make
  • it nice and smooth and then finish the
  • job up with some rough grit sandpaper
  • then you can paint it and make your
  • upper receive richer lower if you're
  • going to call that that's alright well
  • so I'll add picture in here of it when
  • it's completely done not painted yet
  • because I'm not gonna get paint for a
  • while so
  • all right here we are
  • sorry about that shaky I am done sanding
  • right now very very smooth
  • my generous neighbor gave me some some
  • nice rough grit and smooth grit
  • sandpaper so you get her nice and smooth
  • because I didn't have any um least holes
  • by the way up here or how I will make
  • the once again I'm still calling it
  • upper receiver to the lower receiver the
  • upper is the air cannon the lower is the
  • obviously this part of my stock I just
  • made so now I will move on to painting
  • this black if I have enough fan after
  • and check yet
  • if not we'll just move on with the rest
  • of the project so stay tuned alright
  • I do have paint so I'll continue with
  • what I was saying about the paint I will
  • hang this up in my garage a on those
  • little beams right there if you can see
  • those and then paint it I've got a fan
  • going in here and obviously the doors
  • open if you were observing to saw that
  • so all I'm gonna do is maybe put some
  • fish eye hooks right in here where the
  • air camera be on top and you won't be
  • able to see the hole and now we're gonna
  • hang it from the from the ceiling of the
  • gravity beam from the garage or I could
  • also run fishing wire through here and
  • hey so I can get all of it done at one
  • time don't have to flip it over and hit
  • the camera but no so yeah I'll paint
  • this I'll go back you probably in three
  • seconds but in an hour in real time for
  • me
  • all right here we are I ended up just
  • running a nail through the holes I
  • drilled if you can see that and I'm
  • trying a new thing I've never done
  • before I have put the clear coat on
  • first which is I don't recommend this
  • this is half the reason I put it on
  • first
  • it's Valspar clear satin for inside and
  • outside I mean here I would recommend is
  • because it's extremely rough and I don't
  • even think sentence means if I'm not I'm
  • not I don't really remember no I think
  • satin means rough it's a slightly rough
  • it's supposed to be a slightly rough
  • finish but it's not so I wouldn't
  • recommend it get I don't know Kryolan or
  • something yeah so I did my first clear
  • coat and I'll probably do two or three
  • black coats and I'll do another clear
  • coat over that anyways
  • I've got a generic quick dry spray paint
  • here I'm gonna do that as a first coat
  • and I'll put the higher I guess you'd
  • call it a higher-end spray paint I'll
  • pull that as my second coat and I'll do
  • another clear coat which as I said
  • earlier if you already forgot I put a
  • clear coat on first tips for spray
  • painting hold the can about eight to 12
  • inches away don't want to get too close
  • to where the drip and you don't want to
  • spray it in like the winter say anything
  • below sixty degrees you don't want to
  • spray paint because your pain will just
  • drip and you'll get a blotchy paint job
  • finish so right now it's I think it's 80
  • something outside so that's pretty good
  • brother to spray paint in so I will get
  • the painting and then I'll show you the
  • results right here we are with my second
  • coat of black I'm gonna do a third one
  • and I'm gonna I guess put it on camera
  • for you guys who don't know how to paint
  • Lior or if you just want to see it well
  • I'm not really everybody knows that it
  • spray paint but no dusty for those of
  • you who want to see me paint it so what
  • I'm doing right now with some frylock
  • by the way I have a fan going and the
  • door is open for ventilation so that's
  • why I'm a little closer than eight
  • inches because the fan takes the pain
  • away too fast
  • alright that was a heavy coat and so
  • that's that brow I'll do a clear cut
  • it'll just be the same thing just clear
  • coat and then I will as I promised
  • earlier show a picture of it with the
  • air cannon on top
  • here you are with the finished product
  • our lower receiver this guy at the upper
  • receiver
  • monitor with zip ties eight of them and
  • there's a sign there but this is how it
  • looks
  • I'd say that's pretty badass
  • so the thing is you're on design do it
  • everyone this is really just what I
  • wanted and our tip if you don't wanna
  • damage your air cannon like make
  • scratches in it when you player do what
  • I did right here if you can see that
  • there's inner - I cut up and I have it
  • here to kind of spread out the pressure
  • that the zip tie is doing even though
  • there is eight of them to spare out the
  • pressure the tension but I like to have
  • this just to keep the barrel clean and
  • keep the scratches off the paint which
  • it does very well so thank you for
  • watching and hope you found this very
  • entertaining out I've said this like
  • three times now I just don't want to end
  • the video so here we go thank you for
  • watching

Download subtitle

Description

***SAME PRINCIPLES APPLY TO REAL WEAPONS-THIS IS AN AIR CANNON

Keywords

home made air cannon stock but wood nails jig say porter cable how tutorial spray paint valspar krylon make your own lower reciever for weapon gun crossbow firearm bull pup rifle assault Airsoft

Popular this week

Related videos

TheTV in 90 countries


16 main categories